PKP
Sight Flow Indicators
Flow indicators, also known as sight glasses, are used for visual and quantitative flow indication of liquids and gases. The flowing medium can be observed through a sight glass.
For particularly clear liquids or gases, the flow indicators/sight glasses are equipped with rotors, flaps or balls to make the flow visible.
Variable Area Flowmeters
Flow meters based on the float principle are used for flow measurement, display and monitoring of a wide variety of liquids and gases. The flow rate can be read through built-in sight glasses with scales. Attached contacts switch reliably at the set switching points. All-metal devices, optionally with pointer display, are available for use at high pressures.
Paddle Type Flowmeters and Switches
The flow meters and monitors with impact disk, paddle or flap measure the flow of liquids and gases. The deflection of the paddle is proportional to the flow. Built-in contacts, microswitches and measuring sensors are available for further processing of the output signal. The variety of designs, materials and measuring ranges offer a wide range of applications.
Paddle/Oval Wheel, Nutating Disc, Turbine, and Gear Wheel Flowmeters
In the case of impeller and turbine flow meters, a moving wheel is driven by the flowing medium (low-viscosity liquids), thus generating a pulse/frequency output according to the flow. Downstream electronics can further process this signal into analog signals and/or switching points.
Electronic Flowmeters
Electronic flow meters include magnetic inductive, ultrasonic and calorimetric flow meters/thermal mass flow meters. In addition to the various analog outputs, frequency and pulse outputs and switching points are also available. The flow of liquids and gases is reliably measured with this group of devices.
Needle Valves
Standard and high pressure variants in a range of materials from carbon steel, brass and 316Ti SS.
1/8" to 2" in G or NPT threads, up to 630 bar and 250 Deg C
All metals flow limiters for high flow rates
Various designs suitable for pipes sizes from DN15 to DN100, flow limiting without power supply with factory set flow rates, threaded and flanged versions in Branze, Brass or Stainless Steel.
Y-Strainer with magnetic separator
Bronze or stainless steel versions from G1/2 through to G2, with mesh sizes 0.25, 0.5, 0.8 and 1mm. 40bar max pressure and up to 180 Deg C.